Load Cells & Force Transducers

C6B, Force Transducers

C6B Force Transducer: For Nominal Forces Ranging from 200 kN to 10 MN

The C6B force transducers use a compression-bar design, making them ideal for measuring extremely large forces with minimal displacement. This makes them perfectly suited for highly dynamic applications such as impact testing or fast joining processes.

The C6B series offers an outstanding price-to-performance ratio, particularly in variants with integrated electronics. These stainless-steel sensors are fully hermetically sealed and have a high degree of protection (IP68). A wide range of options enables flexible adaptation to specific measurement requirements. Versions up to 2 MN also include an internal bore, which has proven especially beneficial for monitoring anchor or rope tension.

C6B

Heavy-duty compressive force transducer for precise high-capacity load and structural measurement applications.

Highlights

Rugged compressive force transducers designed for harsh industrial environments
Broad measurement spectrum with nominal forces from 200 kN up to 10 MN
Hermetically welded construction with IP68 degree of protection
Versatile configuration options with customizable cable lengths, plug fittings, integrated amplifiers, and TEDS support
Extensive mounting aids available for simplified mechanical installation

Tech Specs

Maximum Capacity (Nominal Load): 200 kN, 500 kN, 1 MN, 2 MN, 5 MN, 10 MN
Tensile / Compression: Compression
Type/Technology: Strain Gauge
Calibration: Calibrated
Output Signal: mV/V (passive strain gauge), Voltage (0...10V), Current (4-20mA)
Degree of Protection: IP68
Mechanical Interfaces: Hole through type, Column type
Height (Without Accessories): 60 mm, 100 mm, 180 mm, 240 mm
Diameter (Without Cable or Plug): 80 mm, 159 mm, 189 mm, 267 mm

<h2>C6B</h2>
<p>Heavy-duty compressive force transducer for precise high-capacity load and structural measurement applications.</p>
<h3>Highlights</h3>
<ul>
<li> Rugged compressive force transducers designed for harsh industrial environments</li>
<li>Broad measurement spectrum with nominal forces from 200 kN up to 10 MN</li>
<li>Hermetically welded construction with IP68 degree of protection</li>
<li>Versatile configuration options with customizable cable lengths, plug fittings, integrated amplifiers, and TEDS support</li>
<li>Extensive mounting aids available for simplified mechanical installation</li>
</ul>
<ul>
</ul>
<h3>Tech Specs</h3>
<ul>
<li><strong>Maximum Capacity (Nominal Load):</strong> 200 kN, 500 kN, 1 MN, 2 MN, 5 MN, 10 MN</li>
<li><strong>Tensile / Compression:</strong> Compression</li>
<li><strong>Type/Technology:</strong> Strain Gauge</li>
<li><strong>Calibration:</strong> Calibrated</li>
<li><strong>Output Signal:</strong> mV/V (passive strain gauge), Voltage (0...10V), Current (4-20mA)</li>
<li><strong>Degree of Protection:</strong> IP68</li>
<li><strong>Mechanical Interfaces:</strong> Hole through type, Column type</li>
<li><strong>Height (Without Accessories):</strong> 60 mm, 100 mm, 180 mm, 240 mm</li>
<li><strong>Diameter (Without Cable or Plug):</strong> 80 mm, 159 mm, 189 mm, 267 mm</li>
</ul>

Request Information

Fill out the form below and our team will get back to you within 24 hours.

Full Name *

Email Address *

Mobile Number *

How did you hear about us? *

Your Inquiry / Message *

4A9NME

* Required fields